-
Australia
Sikaplan® WP 1100-30 HL
| Surespec | : |
0621-Waterproofing- wet areas
|
| Speedspec | : |
07130-Tanking & waterproofing
|
| Based | : | Virgin material with consistent quality |
| Colour | : | signal layer: yellow | Bottom layer: dark grey |
| Suitable for | : | Contact with acidic soft water and alkaline environments |
| Surface | : | Smooth |
| Usage | : | Waterproofing of tunnels and basements against water ingress |
| Effective thickness | : | 3.00 (-5 / +10 %) mm incl. signal layer |
| Roll size | : | 2.20 m (width) × roll length individual as specified |
| Ambient air temperature | : | +5 °C min. |
| Ambient maximum temperature of liquids | : | + 35 °C |
| Burst strength | : | ≥ 80 % (D=1.0 m) |
| Change in elongation | : | < 20 % (machine/ cross) |
| Change of mass | : | < 10%, < 4 % |
| Change of tensile strength | : | < 20 % (machine/ cross) |
| Chemical resistance | : | Saturated Limewash (Test Liquid 2) | 5–6 % Sulfurous acid (Test Liquid 3) |
| Cold temperatures | : | Flexible |
| DEHP (DOP) plasticisers | : | No |
| Dimensional change after heat | : | < 2.0 % (machine/ cross) |
| Flammable | : | Yes |
| Foldability at low temperature | : | No cracks at -20 °C |
| Foldability at low temperatures | : | No cracks at -20°C |
| High resistance | : | Yes |
| Installation | : | Temporary UV stability |
| Long term compression strength | : | Watertight at 7.0 N/mm2 (50 h) |
| Mass per area | : | 3.81 (-5 / +10 %) kg/m2 |
| Microbiological resistance | : | Change in elongation ≤ 15 % | Change of tensile strength ≤ 15 % |
| Reduction of tensile strength and elongation | : | ≤ 20 % |
| Resistance to impact | : | Watertight at 1250 mm drop height (500 g falling weight, Method A) |
| Resistance to oxidation | : | Change in elongation ≤ 10 % | Change of tensile strength ≤ 10 % |
| Resistant to | : | Root penetration and micro-organisms |
| Self-extinguishing in fire | : | Yes |
| Service temperature | : | - 10 °C min. /+ 35 °C max. |
| Shelf life | : | 5 years |
| Storage conditions | : | Protected from direct sunlight, rain, snow and ice, etc. |
| Tensile strength | : | 170 N/m2 |
| Tensile strength detail | : | 17.0 (± 2.0) N/mm2 (machine direction) | 16.0 (± 2.0) N/mm2 (cross direction) |
| Workability, thermal weldable | : | Optimized |
| Certification | : | Fluid barrier.' according to EN 13491 |
| Environmental safety | : | BBodSchV / M Geok E |
| Reaction to fire | : | Class E |