The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder that is California Department of Corrections and Rehabilitation (CDCR) compliant. Designed as a simple holder to be surface mounted, the toilet roll is placed in the "cup" of the bracket.
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is suitable for all public restroom facilities where compactness is important and high use or corrosion is a concern.
Anti-Vandalism Features:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is available in 12 gauge Stainless Steel for California Department of Corrections and Rehabilitation (CDCR) facilities.
Corrosion Resistance:
This toilet paper dispenser is available in 304L Stainless Steel. For most restroom facilities, 304L is the most cost effective solution as it it provides good corrosion resistance in non-salt water environments.
Toilet Paper Capacity:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder holds a single 5" toilet paper roll.
ADA Compliance:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is ADA compliant when properly mounted and installed.
Mounting Method:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is intended to be securely mounted using at a minimum 3/8” lag bolts. It can be partition mounted, or securely anchored into cinder block using 3/8” lag bolts that fully penetrate the cinder block. For sheet-rock installations it is necessary to use a 3/4” backing behind the sheet-rock to ensure it is securely fastened to the wall.
Features:
- Heavy Duty Commercial Design
- Made in USA
- Surface Mounted
- CDCR Compliant
- Corrosion Resistant
- Industry Leading Warranty against Vandalism
Installation:
Secure fixture to wall with appropriate 3⁄8” Stainless Steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls. Partitions may require T-nuts or other suitable anchoring devices. When possible it is recommended that units be through bolted back-to-back providing optimal installation strength.
Guide Specification:
Dispenser shall be constructed with American made, 12 gauge 304L or 12 gauge 316L Stainless Steel joined /w full seam TIG welding and edges de-burred. Dispenser shall not be cross-metal contaminated during manufacturing construction. Dispenser shall have 3⁄8” mounting holes.
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder that is California Department of Corrections and Rehabilitation (CDCR) compliant. Designed as a simple holder to be surface mounted, the toilet roll is placed in the "cup" of the bracket.
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is suitable for all public restroom facilities where compactness is important and high use or corrosion is a concern.
Anti-Vandalism Features:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is available in 12 gauge Stainless Steel for California Department of Corrections and Rehabilitation (CDCR) facilities.
Corrosion Resistance:
This toilet paper dispenser is available in 304L Stainless Steel. For most restroom facilities, 304L is the most cost effective solution as it it provides good corrosion resistance in non-salt water environments.
Toilet Paper Capacity:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder holds a single 5" toilet paper roll.
ADA Compliance:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is ADA compliant when properly mounted and installed.
Mounting Method:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is intended to be securely mounted using at a minimum 3/8” lag bolts. It can be partition mounted, or securely anchored into cinder block using 3/8” lag bolts that fully penetrate the cinder block. For sheet-rock installations it is necessary to use a 3/4” backing behind the sheet-rock to ensure it is securely fastened to the wall.
Features:
- Heavy Duty Commercial Design
- Made in USA
- Surface Mounted
- CDCR Compliant
- Corrosion Resistant
- Industry Leading Warranty against Vandalism
Installation:
Secure fixture to wall with appropriate 3⁄8” Stainless Steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls. Partitions may require T-nuts or other suitable anchoring devices. When possible it is recommended that units be through bolted back-to-back providing optimal installation strength.
Guide Specification:
Dispenser shall be constructed with American made, 12 gauge 304L or 12 gauge 316L Stainless Steel joined /w full seam TIG welding and edges de-burred. Dispenser shall not be cross-metal contaminated during manufacturing construction. Dispenser shall have 3⁄8” mounting holes.
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder that is California Department of Corrections and Rehabilitation (CDCR) compliant. Designed as a simple holder to be surface mounted, the toilet roll is placed in the "cup" of the bracket.
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is suitable for all public restroom facilities where compactness is important and high use or corrosion is a concern.
Anti-Vandalism Features:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is available in 12 gauge Stainless Steel for California Department of Corrections and Rehabilitation (CDCR) facilities.
Corrosion Resistance:
This toilet paper dispenser is available in 304L Stainless Steel. For most restroom facilities, 304L is the most cost effective solution as it it provides good corrosion resistance in non-salt water environments.
Toilet Paper Capacity:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder holds a single 5" toilet paper roll.
ADA Compliance:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is ADA compliant when properly mounted and installed.
Mounting Method:
The AA-TP1-CDCR Stainless Single Roll Toilet Paper Holder is intended to be securely mounted using at a minimum 3/8” lag bolts. It can be partition mounted, or securely anchored into cinder block using 3/8” lag bolts that fully penetrate the cinder block. For sheet-rock installations it is necessary to use a 3/4” backing behind the sheet-rock to ensure it is securely fastened to the wall.
Features:
- Heavy Duty Commercial Design
- Made in USA
- Surface Mounted
- CDCR Compliant
- Corrosion Resistant
- Industry Leading Warranty against Vandalism
Installation:
Secure fixture to wall with appropriate 3⁄8” Stainless Steel anchoring hardware for optimal installation strength (not provided). Recommend 3⁄4” or greater back bracing for walls. Partitions may require T-nuts or other suitable anchoring devices. When possible it is recommended that units be through bolted back-to-back providing optimal installation strength.
Guide Specification:
Dispenser shall be constructed with American made, 12 gauge 304L or 12 gauge 316L Stainless Steel joined /w full seam TIG welding and edges de-burred. Dispenser shall not be cross-metal contaminated during manufacturing construction. Dispenser shall have 3⁄8” mounting holes.
United States
Australia
Hong Kong SAR
Indonesia
Malaysia
New Zealand
Philippines
Singapore
United Arab Emirates
Vietnam
Denmark
Sweeden
Finland
Norway
